The Plan B Model 1 Protected Power Source is an insurance policy against the big stupid: Plugging modules in backwads. Each power terminal on the PSS is individually shielded by it's own protective diodes and resettable fuse which simply shuts the power down to the effected module, leaving the rest of the modules powered off the Model 1 uneffected, online and operational. To reset the power terminal simply plug the module in correctly and you're back on line. No need for mechanical resets of any type - the Model 1 takes care of that for you. Each power terminal on the Model 1 busboard supplies up to 200mA of protection.

The PSS accepts it's power input from either an Analogue Systems DIP 16 or Deopfer Inline 16 power strip. You simply connect the Model 1 as you would a module, and then run up to five powered units from it. Four supplied standoffs allow for multiple mounting options within your Doepfer or Analogue System chassis.

The PSS is highly recommended for the Plan B Model 15 VCO, which may suffer catastrophic damage if power is reversed, or for anyone using older A. Sys or Doepfer Chassis.